Twill Foil Holographic TCG cardstock - DIY Proxies - US Letter Size (8.5x11in) - 20 Sheets

300gsm, 310gsm, or 330gsm Blue or Black core cardstock for use in high quality proxies or for DIY projects which call for TCG quality cardstock.

• ⚠️PLEASE READ DESCRIPTION CAREFULLY FOR PRINTER COMPATIBILITY⚠️
• NOT COMPATIBLE WITH NON-UV INKJET. Does not work with the ImageCLASS. You'll need a UV printer or a high gsm rated Laser printer.
• 8.5*11in Sheets. Fits in standard consumer printers. A back-fed laser printer or UV inkjet is the most compatible printing technology. It will jam any non-back fed printer. NOT COMPATIBLE WITH NON-UV INKJET PRINTERS. This paper has a surface coating which prevents dye absorbtion.
• Laser Printers: Do not duplex. Use the rear-feed tray. Check the paper thickness gsm specification of your printer. The melted toner acts as a sort of varnish (water resistant, contributes some snap) which is on commercially produced cards. Use the highest thickness setting so that the printer uses the highest fuser temperature, or you may see flaking. You will need to tweak the settings of your printer and color management.
• UV-Inkjet Printers: These are the best, but can be expensive. There are small flatbed models and big large format models. They can print on foil. You can get professional/commercial results from these because they have superb color, can apply a white layer, and a varnish layer. Combo roll/flatbed models can even be used for spot foiling. ⚠️You may need to first print a white layer underneath your color layer.⚠️
• The surface is coated: Dye/Pigment ink will not absorb unless it is UV cured. Toner does work if the printer has the right specs.
• Each 8.5*11in sheet fits 9 poker (63*88mm) Poker/MTG/PKM sized cards.