MAXODYNE® AW10 Antiwear Oil Enhancer & Fortifier 1 Gal (3.87 L)

Maxodyne AW10 Antiwear is formulated to deliver tremendous increases in lubricant load carrying ability, wear reduction and friction/heat reduction. Increase the load carrying capacity of your oil, whether it be engine, transmission, final drive or hydraulic with Maxodyne AW10 Antiwear Oil Enhancer & Fortifier. The high load carrying ability ensures far superior protection against abrasive and adhesive wear than oil alone can. Transmissions will run cooler, both manual and automatic, with much, much less wear. Hydraulic systems too will operate at a cooler temperature. Massive increases in lubricant load carrying ability, wear reduction and friction (& heat) reduction. Extend the life of your engine, transmission and hydraulics! Maxodyne AW10 Antiwear Oil Enhancer & Fortifier is added directly to the lubricating oil – engine, transmission (automatic or manual), differential, final drive and hydraulic oils. Do not add to brake or clutch hydraulic systems. Maxodyne AW10 Antiwear is not suitable for wet clutch or wet brake systems. Treatment rate: Engines: add at 2% of lubricating oil capacity Manual transmissions, differential, final drives: add at 5% of lubricating oil capacity Automatic transmissions & hydraulics: add at 1% of lubricating oil capacity As a rule of thumb, and depending on the vehicle’s oil capacities, the following is usually helpful in determining which size is most suitable for your application – 8 fl oz -16 fl oz: Enough for complete treatment for cars & small to medium SUV’s, small trucks, etc 32 fl oz - 64 fl oz: Enough for complete treatment for medium trucks, RV’s, 4 Wheel-drives, etc 1 Gallon: Enough for complete treatment for large trucks & machinery, Fleet & workshops etc

• Highly concentrated formula! Developed for both gasoline and diesel vehicles & machinery. All engines: 2% Treatment Rate. 2.5 oz (80 mL) treats 4 quarts of engine oil. 6.5 oz (200 mL) treats 10 quarts of engine oil.
• All manual transmissions, differentials, final drives: 5% Treatment Rate. 6.5 oz (200 mL) treats 4 quarts of gear oil. 16 oz (500 mL) treats 10 quarts of gear oil.
• All automatic transmissions & hydraulics: 1% Treatment Rate. 1.25 oz (40 mL) treats 4 quarts of automatic transmission/hydraulic fluid. 3 oz (100 mL) treats 10 quarts of automatic transmission/hydraulic fluid.
• 8 fl oz -16 fl oz: Enough for complete treatment for cars & small to medium SUV’s, small trucks, etc. 32 fl oz - 64 fl oz: Enough for complete treatment for medium trucks, RV’s, 4 Wheel-drives, etc. 1 Gallon: Enough for complete treatment for large trucks & machinery, Fleet & workshops etc.
• Particularly effective with all HEUI injector systems, i.e. Powerstrokes, etc. Eliminate stiction. Lowers stress in all components. Significantly increase oil strength.
• Decrease operating temperature. Reduce friction, wear and heat. Provides superior engine component protection, especially during cold starts.
• Quieter engines. Slicker gear changes.
• Suitable for all engines, transmissions, power steering, differentials and hydraulics.
• Does not alter the oil viscosity.
• Detailed treatment rate chart included.