E1840P Sloppy Mechanics Stage 2 Camshaft Lifter Kit Fit for 1997-2007 GM Chevy LS1 V8 4.8L 5.0L 5.3L 6.0L 6.2L LS1 LS2 LS6 LQ4 LQ9 Cam Kit Gen Ⅲ/Ⅳ mit Stage 2 Cam/Lifters/Springs/Trays/Pushrods

Replace: E1840P,E-1840-P, PAC-1218, HL2148S,PR-15740S, TCS45993,12557840,12499225,12551163,12596365Weight: 11kgE1840P Engine Camshaft for GM Chevy 1997-2007 LS L92 L99 5.3L 5.7L 6.0L 6.2L V8 LSx Sloppy Stage 2Engine Type: LS-SeriesCamshaft Type: Hydraulic RollerIntake Duration: @ .050": 228°Exhaust Duration: @ .050": 230°Intake Valve Lift: .585"Exhaust Valve Lift: .585"Lobe Separation: 112°Intake Centerline: 108°Advertised Intake Duration: 283°Advertised Exhaust Duration: 286°16pcs PAC-1218 Drop-In Valve SpringsOutside Diameter of Outer Spring (in): 1.290 in.Coil Bind Height (in): 1.140 in.Damper Spring Included: NoInstall Load: 130lbsInstall Height: 1.800"Open Height: 1.175"Open Load: 318 lbsPushrods7.400" Chromoly One Piece Pushrods, 5/16" diameter, and .080" wal

• [Replace OE Number]: CAM: E1840P, E-1840-P ; Lifters:12499225; HL2148S, TCS45993, 12557840, , 12551163, 12596365, PR-15740S, PAC-1218,.
• [Applicable Model]: Fit for 1997-2013 Chevrolet vehicles, this kit fits for 4.8L, 5.3L, 5.7L, 6.0L engines, including LS1, LS2, LS6, LQ4, LQ9, LM7, and other LSx series engines.
• [Include]: 1* E1840P CAMSHAFT; 16X MATCHING SPRINGS SET; 1* SET OF GASKETS; 1* BOLT; 16* PUSHRODS; 16* LS7 LIFTERS.
• [1-Year Warranty]: We have 100% inspected and tested the products before shipping. If there are any problems with the product after purchase, Please contact us at any time and we will actively solve the problem for you. Thanks. (If you need installation instructions, please contact us.)
• [Hydraulic Tappet Install]: Check whether the engine oil is clean and whether the recommended grade of oil is used; Note: The grades of engine oil used in winter and summer are different! If it is 10W30 in winter, but 15W40 in summer. Check whether the hole diameter of the engine cylinder head is out of tolerance, and the maximum is not allowed to exceed 0.10mm. Note: It must be ensured that hydraulic tappets of standard size cannot fit into oversized cylinder head housing holes!